Everything on the Saber Spin, except the stem/stick, holder will be made complete in the material selected. The stem/stick, holders will all be made in SS
SPECIFICATIONS: (Approx.)
Spin Stick: 88.9mm/3.50"
Post / Stick: 6.35mm/0.25" x 63.5mm/2.50"
Spin Cap: 20mm/0.787" x
Base: 17.78mm/.70" x 6.35mm/0.25"
Total Length w/Sabr Attached: 241.3mm/9.5"
BEADS SPECIFICATIONS: (Approx.)
Switch: 15mm/.59" x 21mm/0.826"
Spec Ops: 15mm/.59" x 20.5mm/0.81"
Slotted Barrel: 15mm/.59" x 23.5mm/0.925"
SABER SPECIFICATIONS without SABER ATTACHMENT: (Approx.)
Ultem:
Brass: 127g/4.48oz
Bronze: 133g/4.69oz
Copper: 134.5g/4.78oz
Stainless Steel: 120g/4.23oz
Black Oxide Stainless Steel: 120g/4.23oz
Titanium: 68.5g/2.42oz
Tungsten: 267g/9.42oz
SABER ATTACHMENT SPECIFICATIONS
Sabr Acrylic: or Glow - 9g/0.35oz
Saber: 9.75mm/.384" x 149.86mm/5.9"
Saber Holder w/ Grub Screw - 9g/0.317oz
SPECIFICATIONS w/ SABER ATTACHMENT (Approx.)
Ultem:
Brass: 136.5g/4.81oz
Bronze: 142.4g/5.02oz
Copper: 143.5g/5.06z
Stainless Steel: 129.5g/4.57oz
Black Oxide Stainless Steel: 129.5g/4.57oz
Titanium: 77.4g/2.73oz
Tungsten: 298g/10.51oz
SABR MATERIAL:
Includes: Red or Green Acrylic Sabr
*** Resin Glow Are Available for an Additional $40
* To charge the GLOW RESIN material, simply place it in direct sunlight or use a UV flashlight. The glow will start to show in partial darkness with the complete luminosity viewed in complete darkness. It can be charged over and over again for years of glowing fun!
* ALL SALES FINAL * * NO RETURNS OR EXCHANGES *